Announcement

Collapse
No announcement yet.

Sticky End Stops

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sticky End Stops

    Have people been cutting excessively sappy materials in the machine lately? The machine stinks, it's sticky and the axis end stop microswitches are gummed up. This is what has been causing the awful grinding noises and weird slow tracking almost every time the cutter is power cycled. It tries to go home but at least one microswitch is stuck and it's confusing the controller.
    The microswitches can be replaced but the same gunk will be accumulating everywhere else, including the optics.

  • #2
    The glue based materials like hardboard and MDF make the stickiest smoke

    Comment

    Working...
    X