The DXF files I am exporting from CorelDRAW on the Design Lab computer seem to be clean when they import to RD Works.
I do make sure prior to export that I remove fills and make all lines hairline. Filled objects must be ‘closed’ ie, the nodes are connected all around the perimeter of the object. If they are not, the comp adds a wild line to auto connect the open object.
One thing I am still trying the get right is making multiples easily, ie telling RDWorks to make 16 duplicates of something 4x4 with a certain distance between them. I can make the field, but it wont cut them.
it’s generally cutting more vertically than when I used it a few weeks ago, eg, my cuts didn’t have a slope to them.
before I started, the bed was not nearly high enough, and the bed was bowed upwards, eg “concave”. It seems the back of the bed was caught on the frame, so I lowered it down and pulled the bed forward, at which point it moved freely, and came up high enough to focus properly.
it looks like the laser is out of alignment when cutting on the forward right corner (towards the control panel) like the laser is diffracted inside the tube and cutting two lines. I noticed this on a few pieces. I’ll see if I can find a sample to get a picture of.